2010 Ph.D., Aerospace and Mechanical
Engineering, University of Southern California
2004 M.S., Aerospace and Mechanical Engineering,
University of Southern California
2002 B.S., Aerospace and Mechanical Engineering,
University of Southern California
F. Browand, D. Plocher and C. Radovich,
"Spray from a rolling tire: the mechanics of droplet formation,"
University of Southern California Department of Aerospace &
Mechanical Engineering Report USCAME 200, 2010.
C. Radovich and D. Plocher,
"Experiments on Spray from a Rolling Tire,"
Engineering Conferences International (ECI), Aerodynamics
of Heavy Vehicles II: Trucks, Buses and Trains, Springer, 2007.
C. Radovich,
"Wind Tunnel Test of Cab Extender Incidence on Heavy Truck Aerodynamics,"
SAE Commercial Vehicle Engineering Congress,
paper number 2005-01-3527 (05CV-249), November 2005.
F. Browand, C. Radovich and M. Boivin,
"Fuel Savings by Means of Flaps Attached to the Base of a
Trailer: Field Test Results,"
SAE 2005 World Congress & Exhibition, paper number 2005-01-1016,
April 2005.
B. Medved and C. Radovich,
"Fluctuating Static Pressure Measurements in the Allied
Aerospace North American 7 x 7 Foot Trisonic Wind Tunnel,"
24th International Congress of the Aeronautical Sciences,
August 2004.
F. Browand, J. McArthur and C. Radovich,
"Fuel Savings Achieved in the Field Test of Two Tandem Trucks,"
California PATH Research Report, report number UCB-ITS-PRR-2004-20,
June 2004.
B. Medved and C. Radovich,
"Notes on Test Section Optimum Porosity and Flow Quality in
the Allied Aerospace North American 7 x 7 Foot Trisonic Wind Tunnel,"
Supersonic Tunnel Association International, May 2004.
C. Radovich and J. McArthur,
"Hotwire Anemometry,"
pilot volume for the USC Viterbi School of Engineering Video
Lecture Series, July 2004.